World's FIRST Made for iOS Bluetooth Barcode Scanner!!

The KDC200i and KDC300i can connect via Bluetooth to the iPad with OS 3.2 and later and iPhone , iPod Touch (aka iTouch), with iOS 4 and later. This is a quick demonstration video on how to connect the KDC200i to an iPad. First go to iPad Settings and confirm Bluetooth is enabled. Open the menu on the Bluetooth scanner by pressing both menu buttons on the side simultaneously. (Use the down and up buttons on the side of the scanner to highlight the desired menu option.) Go to the "BT Config" menu, select the "ConnectDevice" option and insure "iPhone" is selected. Make sure to change the following settings under the "BT Config" menu. "Auto Connect" - Enable "Auto Power On" - Enable "PWR On Time" - desired seconds (In this example we will use 1 second) Pairing: Go to the "BT Service" select "Discovering" - you should see the "Discovering Started" The scanner will display the Bluetooth devices found. Select the iDevice. And configure the Bluetooth PIN option (the default PIN is four zeros (0000). Enter the PIN 0000 on the iDevice. To disconnect the Bluetooth scanner and turn off the Bluetooth radio, simply scan the Bluetooth off control barcode found on Serialio.com To reconnect: Simply press and hold the Scan button until you see "Please wait", then the Bluetooth scanner should re-connect. For more information visit: www.serialio.com OR Contact us at (805)964-8883 or sales@serialio.com.

go to link : Find camera digital ,hd camcorder , led lcd hdtv , Find camera digital ,hd camcorder , led lcd hdtv ,